Bird Gazebo with Peaked Roof
- Made from strong, yet light-weight, aluminium frame in a choice of 2 colours: clear anodized (silver colour) or black anodized
- Measures 1.3m wide (point to point) and 1.9m high (also available 1.6m wide and 2.4m wide)
- Strong 2.5mm thick galvanised mesh walls with 25mm squares (smaller mesh, stainless steel and powder coated mesh available)
- Many optional upgrades available to fully customise your Bird Gazebo
- Takes around 1-2 hours to assemble, with detailed illustrated instructions provided
Unlike steel or timber, bird aviaries made with aluminium frames will not rust, rot nor deteriorate in the weather. Your Royal Rooster bird aviary will look just as great in many years' time due to the durable materials that are used in its construction. Royal Rooster's specially designed aluminium is made with u-shaped channels in which the mesh or mini-fluted iron slots in directly. This means that there are no ugly fixings on either side of the panels to keep the materials in place. No welds or sharp edges on the mesh to be concerned about.
Black Frame Optional Upgrade: The cages as standard are made with silver (clear anodised) aluminium framework, however black anodised frame is also available as an optional upgrade.
PEAKED IRON ROOF
The 'Bird Gazebo with Peaked Roof' comes standard with a peaked iron roof made from zincalume (silver) mini fluted iron. Five Colorbond colours are also available as an optional upgrade so you can customise your aviary to best suit your backyard.
MESH OR IRON WALLS
The Bird Gazebo with Peaked Roof comes standard with all mesh walls enclosed with 25mm x 25mm x 2.5mm mesh.
3 Iron Walls Optional Upgrade: If you would like some extra protection for your birds, you can chose to have the 3 back walls enclosed with mini fluted iron in a choice of Colorbond colours.
SKIRTING/ KICK-BOARDS (optional)
These aviaries can also have a 30cm skirting/ kick-board incorporated around the entire perimeter of the cage. This can provide extra protection for your birds when they are on the ground from visiting animals. Also helps to keep out rodents. The kick-boards made made in Zincalume (silver) iron as standard but Colorbond colours are also available.
These colours include Woodland Grey, Pale Eucalypt, Deep Ocean, Monument and Cottage Green.
INSULATED ROOF AND WALLS
These aviaries are also available with an insulated roof and/ or insulated walls. This is done by using 7mm silver backed insulation that is sandwiched between the mini fluted iron walls on the outside and aluminium composite panel on the side and underside of the aviary.
GALVANISED OR STAINLESS STEEL MESH
The Bird Gazebo aviaries are made with galvanised steel mesh. As standard these bird aviaries are made with 25mm x 25mm mesh and a wire thickness of 2.5mm. This prevents large birds from escaping and the wire thickness of 2.5mm means it can't be chewed through by most birds.
Galvanised Mini Mesh Optional Upgrade: If you have smaller birds then 'Budgie Mesh' (mini mesh) which has 12.5mm x 12.5mm squares and has wire thickness of 1.24mm may be needed. This prevents smaller birds escaping and has thick enough wire that cannot be chewed through by smaller birds.
Stainless Steel Optional Upgrade: For those wanting stainless steel mesh (Grade 304) this is available in either 25.4mm x 25.4mm x 2mm or 12.7mm x 12.7mm x 1.6.
POWER COATED MESH (optional)
For those wanting a black finish to their mesh, your choice of mesh size and finish can also be powder coated in a black finish.
OPEN FLOOR DESIGN
These aviaries do not have a floor as standard. You may choose to put your aviaries on a concrete slab to keep out rodents and to have a nice near floor in your aviary. If this is not an option and you are concerned with rodents, then a mini mesh floor may be required.
Mini Mesh Floor Optional Upgrade: If you plan to put sand, gravel or bark chips on the ground in your aviary, you may wish to put a mini mesh floor down first to prevent mice from digging their way under. Galvanised mini mesh or stainless steel mini mesh floors are both available.
Solid Aluminium Composite Floor Optional Upgrade: Alternatively you can have the floor on your aviary made with composite panel to keep out pests and making it easy to clean.
Optional castors are also available if you plan to move your enclosure around on pavers or concrete on a regular basis. You would need a floor in your aviary if you chose this upgrade.
The Bird Gazebo style of aviary has a large door at the front allowing easy entry into the aviary. This door is 1.94m high.
Safety Entry Cage Optional Upgrade:
If you are concerned with your birds escaping when you open the door, you may wish to purchase a 'safety entry cage' which is also called a 'safety catch' with your aviary to prevent accidental losses. You simply walk into the safety entry cage, close the door behind you before you open the door on the main aviary. This cage needs to be purchased separately in addition to your main bird aviary
DOWEL PERCHES WITH PERCH HOLDERS (optional)
Royal Rooster can supply dowel perches that go the width of the Bird Gazebo in three different sizes and come with galvanised perch holders to be fixed to either solid metal walls or the mesh of your aviary.
AVIARY ACCESS FEEDERS & CLIP ON BOWLS (optional)
Royal Rooster's own designed 'Aviary Access Feeder' enables you to feed your birds from outside your aviary, no need to go inside. Reduce the risk of escape of your precious birds. Easy slide up window for access, viewing and can be locked for security of your birds. Three timber perches of various sizes to cater for different sized birds. Easy to install to any style of aviary, regardless of the mesh size. Includes 2 x 400ml (1 pint) removable stainless steel bowls. Suitable for water, seeds, fruit or vegetables.
Royal Rooster also has stainless steel hook on bowls available in four sizes: 280ml, 560ml, 850ml and 1.36L.
BIRD SHELVES (optional)
Add extra interest and landing locations for your birds with a range of shelves that come in three styles. The Timber Style Shelves are made with an aluminium frame and inset with 'mod-wood' timber composite lengths. The Standard Shelves are made with an aluminium frame and inset with aluminium composite panel. The Feeders Shelves are made with an aluminium frame and inset with aluminium composite panel with a special cut out for a 300ml stainless steel bowl. These can be installed either in the housing or extension area of your aviary.
CAGE ANCHOR KITS (optional)
Whether you're putting your aviary on concrete, sand, gravel or soil, it's a good idea to anchor down if strong winds are a concern in your location.
DELIVERY INSURANCE (optional)
This covers the replacement or repair of your aviary if damaged in transit with TNT as well as the freight to transport damaged parts back to us and new parts back over to you. Only $15 for peace of mind. Highly recommended.
These cages are straightforward to put together and come with detailed, illustrated instructions. You’ll need a rubber mallet, an electric drill and a number 2 Philips-head driver. Assembly time should be between 4-5 hours depending on skill level. If you order a cage with mini mesh walls, a pair of pointy nose pliers is also handy.
LEAD TIME & FREIGHT
All aviaries are made in our purpose built premises on Theen Ave, Willaston in South Australia. Lead times on orders can vary depending on the time of the year and other factors out of our control. Please click here to see that latest lead time on orders.
TNT generally takes between 1-2 weeks to deliver items once picked up from us. Picking up from a TNT depot rather than having your cage delivered to your home can save quite a lot in delivery costs. So that is also an option when you go to check out.
If you live in SA you're most welcome to pick up your order from our premises at 43 Theen Ave Willaston.
|Mini Description||Small hexagonal bird aviary with peaked roof. 1.3m wide and 1.9m tall.|