Canine Castle Deluxe
- Measures 2.13m long, 0.9m wide and 1.05m high
- Made from strong, yet light-weight, aluminium frame
- Strong 2.5mm thick galvanised mesh with 25mm squares
- Made standard with a full solid roof, solid back door and two solid walls in zincalume, galvanised mini corrugated iron. Choice of Colorbond colours available for upgrade.
- Includes removable housing tray in upstairs sleeping area
- Takes between 1-2 hours to assemble, with detailed illustrated instructions provided
Aluminium, unlike steel or timber, will not rust, rot or deteriorate in the weather. You can be rest assured that your pen will be looking just as great in many years' time. Royal Rooster's specially designed aluminium is made with channels in which the mesh or iron slots directly so that there are no ugly fixings on either side of the panels to keep the materials in place.
Black Frame Optional Upgrade: standard enclosures are made with silver anodized aluminium framework, however black anodized framework is also available as an optional upgrade.
SMALL-SIZED GALVANIZED MESH
The sides of the Canine Castle Deluxe pens are made with small sized galvanised steel mesh, 2.5mm thick with 25mm squares. This strong mesh is difficult to accidentally damage and is impossible for dogs to chew through!
Large Mesh Optional Upgrade: You can alternatively have your pen made with 50mm x 50mm mesh that is 3mm thick for that extra strength.
MINI FLUTED CORRUGATED IRON
The side walls, back door and full roof of the Canine Castle Deluxe is made using very modern Zincalume (silver) mini corrugated iron. This is Bluescope steel which is made in Australia.
Colorbond Optional Upgrade: The Canine Castle Deluxe is also available in Colorbond for those wishing their pen to match other colours in their backyard. Colours currently available are Cottage Green, Pale Eucalypt, Deep Ocean, Monument and Woodland Grey. Custom Colorbond colours are also available if required.
Unlike imported enclosures, Royal Rooster enclosures are designed and made in Australia, taking into consideration our very hot summers. The whole front of the housing section on the Canine Castle is open to allow maximum ventilation on hot days.
Weather Shield Optional Upgrade: There is also available an optional 'weather shield' that can also be purchased to provide extra protection in wet or windy weather. This shield further encloses the housing section with still a gap for your dog to enter the housing area.
OPEN FLOOR DESIGN
The enclosures do not have a floor as standard but anti-dig mesh floors can be purchased if required.
Anti-Dig Mesh Floor Optional Upgrade: If you're concerned about your dogs digging their way in, you can order an anti-dig mesh floor to go with your dog pen. These are sections of mesh panel that are wired to the base of the enclosure. The mesh squares are 50mm x 50cm with 3mm wire thickness.
WHEELS FOR MOBILITY
As these enclosures are made with aluminium rather than steel frames, they are easy to move with one person on each end of the pen. If you need to be able to move the enclosure by yourself, then the wheel upgrade may be required.
Heavy Duty Wheel Optional Upgrade: The optional wheel upgrade makes moving your pen even easier. Just turn the lever arms into the raised position on either side of your kennel, push or pull your pen to a new area and then lower again.
REMOVABLE HOUSING TRAY
The upstairs section of the Canine Castle Deluxe has a removable tray. This is made with an aluminium frame and infilled with aluminium composite panel. Simply open the back door, lift out the tray for easy cleaning of your dogs sleeping area.
A timber ladded is included with your Canine Castle Deluxe for smaller dogs or elderly dogs that need the extra assistance getting into the sleeping area.
The Canine Castle Deluxe has two doors. One on the front of the pen allowing easy entry into the pen. Also a door at the rear for access to the sleeping quarters.
DELIVERY INSURANCE (optional)
Highly recommended. This covers the replacement or repair of your pen if damaged in transit as well as the freight to transport damaged parts back to us and new parts over to you. Only $15 for peace of mind.
These enclosures are very simple to put together and come with detailed, illustrated instructions. You’ll need a rubber mallet, an electric drill and a number 2 Philips-head driver. Assembly time should be between 1-2 hours depending on skill level.
LEAD TIME & FREIGHT
All enclosures are made in our purpose built premises in Willaston in South Australia. Lead times on orders can vary depending on the time of the year and other factors out of our control. Please click here to see that latest lead time on orders.
Delivery with TNT generally then takes between 1-2 weeks to arrive. We have both depot pick up and residential delivery as freight options to keep the cost down for those able to collect from a TNT depot or agent.
If you live in SA, pickup from our premises at 43 Theen Ave, Willaston SA 5118 is most welcome.
|Mini Description||Popular mid sized two storey Canine Castle Deluxe. Run area below and sleeping area above.|