Royal Kennel Deluxe
- Measures 2.85m long, 0.9m wide and 0.7m high
- Made from strong, yet light-weight, aluminium frame
- Strong 2.5mm thick galvanised mesh with 25mm squares
- Galvanised mini corrugated iron and flat sheeting
- Four access doors - very easy to kids to use
- Takes between 1-2 hours to assemble, with detailed illustrated instructions provided
Aluminium is much lighter than steel which means less strain for you to move your dog pen around your yard. Also, unlike steel or timber, aluminium will not rust or deteriorate in the weather. You can be rest assured that your dog enclosure will be looking just as great in many years time.
Black Frame Optional Upgrade: These dog enclosures are made standard with silver anodized aluminium framework, however black framework is also available as an optional upgrade.
SMALL-SIZED GALVANIZED MESH
Royal Kennels are made with small sized galvanised steel mesh, 25mm x 25mm x 2.5mm. This mesh is very strong and is impossible for foxes or dogs to chew through or for you to accidentally damage.
Large Mesh Optional Upgrade: If you prefer, you can have your dog pen made with stronger and larger 50mm x 50mm mesh that is 3mm thick.
FOUR DOORS FOR EASY ACCESS
This kennel has four different doors for easy access to your pets. Both ends of the kennel open downwards. The roof is also made up of two hinged sections, allowing you to open just the housing section roof or just the run section roof to reach your puppy or dog.
MINI FLUTED CORRUGATED IRON
The side walls and roof of the Royal Kennel Deluxe is made using mini fluted corrugated iron in Zincalume (silver) colour. This is quality Bluescope steel which is made in Australia.
Colorbond Optional Upgrade: The Royal Kennel Deluxe is also available in Colorbond for those after a colour to best suit your backyard. Colours available are Pale Eucalypt, Deep Ocean, Monument and Woodland Grey. Custom Colorbond colours are also available upon request.
Royal Rooster pens are designed and made in Australia, taking into consideration our very hot summers. The whole front of the housing section on the Royal Kennel Deluxe is open to allow maximum ventilation in the hot summer months. There are also two side ventilation sections on the sides of the enclosure, for extra ventilation in the housing area.
Weather Shield Optional Upgrade: 'Weather shields' are an optional extra that can also be purchased to provide extra protection in wet or windy weather. One shield further encloses the housing section with still a gap for your dog to enter the housing area. The other two shields go over the side ventilation areas to keep the housing area nice and cosy in the cool weather.
OPEN FLOOR DESIGN
The Royal Kennel Deluxe pens have an open floor design as standard. You can then chose if an anti dig floor in needed as well as an optional flooring tray for the housing area.
Anti Dig Floor Optional Upgrade: Optional anti dig floors can also be purchased for those needing to prevent their dogs from digging their way out. These floors come in sections of 50mm x 50mm mesh that is 3mm thick. This can be purchased for the entire floor area of the Royal Kennel Deluxe or if you are wanting a removable tray in the housing area, it would be only in the run section of the dog pen.
Removable Housing Tray Optional Upgrade: This removable floor is made with an aluminium frame and infilled with aluminium composite panel. This can easily be removed via the rear housing door for easy cleaning on a regular basis. Your dog's bedding can go straight on this tray.
As these kennels are made with aluminium rather than heavy steel frames, they are easy to move with one person lifting on each end of the enclosure.
Heavy Duty Wheel Optional Upgrade: The optional wheel upgrade makes moving your dog pen even easier. Just turn the lever arms into the raised position on either side of your pen, push or pull your enclosure to a new area and then lower again.
DELIVERY INSURANCE (optional)
Highly recommended. This covers the replacement or repair of your pen if damaged in transit as well as the freight to transport damaged parts back to us and new parts over to you. Only $15 for peace of mind.
These enclosures are very simple to put together and come with detailed, illustrated instructions. You’ll need a rubber mallet, an electric drill and a number 2 Philips-head driver. Assembly time should be between 1-2 hours depending on skill level.
LEAD TIME & FREIGHT
All kennels are made in our purpose built premises in Willaston in South Australia. Lead times on orders can vary depending on the time of the year and other factors out of our control. Please click here to see that latest lead time on orders.
Delivery with TNT generally then takes between 1-2 weeks to arrive. We have both depot pick up and residential delivery as freight options to keep the cost down for those able to collect from a TNT depot or agent.
If you live in SA, pickup from our premises at 43 Theen Ave, Willaston SA 5118 is most welcome.
|Mini Description||Longer square-frame dog kennel. Extra run section for your dog to move about.|